UNDER 16"	REQUIRES A HITCH IN RISE POSITION

16"-17"	requires the 2” drop/rise hitch

18” - 19”	requires the 4” drop/rise hitch

20” - 21”	requires the 6” drop/rise hitch

22” - 23”	requires the 8” drop/rise hitch

24” - 25”	requires the 10” drop/rise hitch

26” - 27”	requires the 12” drop/rise hitch

28” - 29”	requires the 14” drop/rise hitch

30” - 31”	requires the 16” drop/rise hitch

32” - 33”	requires the 18” drop/rise hitch

OVER 34"	requires the 20” drop/rise hitch

STEP 1

Measure the opening of the receiver tube to determine what size shank your vehicle requires. It will either be 2”, 2.5” or 3”. Please Note: The 3” is only applicable to some 2017 and newer Ford Super Duty trucks and some RVs/semis.

STEP 2

Park your vehicle on level ground and measure from the ground to the bottom inside of the receiver tube, then take that measurement and apply it to the information below. Based on the measurement of 19” from the ground to the bottom opening of the receiver tube this vehicle would require a 4” drop/rise hitch.

Before placing your order, please take into consideration potential vehicle squat. Most trucks may squat approximately 1–4 inches depending on load and suspension. To ensure proper fitment, we may recommend selecting a smaller drop size to compensate for any squat caused by your payload.

If you need assistance determining the correct setup, please contact us at 941-251-8110.